Acrylic Glovebox-2100 Series
Polypropylne Glovebox-2100 Series
PVC Glovebox-2100 Series
Glove box with enlarged access door _maximum opening
Four-port Glovebox-Polypropylene
Closed-Loop Glovebox
Access Doors
Option  Code
Front tilt-up access door, 22"x11"
Upgrade left side access door to
maximum opening (open outwards)
Stand Options

30"Height Stand, Powder Coated Steel
for Single model Glovebox
30"Height Stand, Powder Coated Steel
for twin four-port Glovebox
30"Height Stand, Powder Coated Steel
for Back-to-Back four-port Glovebox
Work Surface / Tray
Option  Code
Spill Tray, Stainless Steel 32"x23"x3/4"
for Single Glovebox
Spill Tray Set of two, Stainless Steel
28.5"x23"x3/4" for Twin Glovebox
Stainless Steel Work Surface For Single
Models (Main Chamber)
Stainless Steel Work Surface For Twin
Models (Main Chamber)
Power Outlet
Option  Code
Hospital Grade Power Strip Four
Outlets, 110VAC/60Hz
Air-tight Cord grips / Feedtroughs for 1,
3, 4, 7 or 10 multi-diamtere cord(s)
$65 to $195
Inert-gas Options/ Atmosphere
Monitors & Controllers
Option Code
Gas-in Port and Adjustable pressure
relief Valve
Flowmeter, range 2-20 SCFH air. with
Stainless Steel valve-External Mount
Automatic Purge Control Unit with
Humidity Sensor & Flowmeter-Type S*
Automatic Purge Control Unit with
Oxygen Sensor (O2 Analyzer)
Oxygen monitor, Digital Display,  0-
100% Oxygen reading, W/ sensor
"Humodule-H", Automatic Nitro Purge Control Unit Type S*:  It's a single purge unit keeps the humidity of enclosure on the set point by purging Nitrogen when the moisture climbs above an adjustable set point. The Nitrogen flow is stopped by a solenoid valve, when the humidity is lower than set point. The input pressure is controlled by the pressure regulator (0 - 15 psi), and the output flow rate by the Flowmeter (0 - 20 SCFH). Read more about Purge control units.
"Humodule-H", Automatic Nitro Purge Control Unit Type D: It is a dual purge unit. While inside related humidity level is below set point, the system provides low purge (2-20 Cubic feet per hour) inert gas maintaining positive pressure inside the enclosure in order to have free contaminants and moisture environment. When the moisture climbs above an adjustable set point the system automatically activates high-flow purge (0.5 - 15 PSI).
Oxygen Analyzer/ Automatic Purge Control Unit with O2 Sensor, 0 to 100% Oxygen level reading range, including external model CAG-250E sensor, locking sensor interface cable, 115/230 VAC, Stainless Steel enclosure, Bench-top, Alarm Output, RS 232 Service port, Available with 4-20mA negative ground, 0-10VDC range ID and choice of 0-1VDC, 0-5VDC or 0-10VDC analog oxygen signal
Oxygen Monitor (oxygen analyzer) with a single range of 0-100% (-/+1%) . The unit is mounted on the foldable  bracket on the side wall of the glove box. Input power is 110-240 VAC. It features a  3-1/2 digit LCD. The oxygen sensor is an ambient temperature electrochemical designed with a threaded end is installed on the glovebox.
Gas-in port & Pressure relief valve are required if using Nitrogen or any inert gas to reduce humidity. Need to be ordered two sets if glove box has a Airlock (transfer chamber). Pressure relief Valve provides safe pressure relief and helps to purge the moisture out the chamber
Hospital grade power strip with four outlets provides 110 VAC if a power outlet is needed inside the glove box.
Single cord or Multi-cord Air-Tight Cord Grips, for cord diameter .08" to 1.28" .Ideal for power cord, data & internet cables, USB, monitor & printer connectors.
Stainless Steel Work Surface or Spill tray preventing scratching, recommended for static Dissipative PVC gloveboxes to protect Anti-static coating. It's also required for transparent gloveboxes which ordered with stand
Two types of gloves are available. Chemical Resistance Anti-static BUTADYL Gloves in white & Neoprene in black. Dry box gloves are in one-piece ore two-piece style. Two-Piece is a set of gloves and Accordion Sleeve 24"-28" Flexible Length, black rubber sleeve & white Butadyl gloveSee all available options for Dry box gloves
30" Height Stand, Cleanroom Compatible Epoxy Powder Coated Steel for Glovebox including caster (two locking). (also Available with 35" Height or custom height)
Front tilt-up door with stainless steel frame and two face-mount latches, door opening 22"Wx11"H for easier access, Window material varies based on the model.
Enlarged left side door with maximum door opening for the application requires more door clearance. Stainless steel door frames with four lift & turn compression latches.

Standard Options for Isolation Glove Boxes S-2100

Gloveboxes available in four materials: 1/4" Acrylic, 1/4" Static-dissipative PVC, 1/4" Nondissipative PVC and 1/4" White polypropylene (great Chemical resistant).

Clear acrylic glove box is ideal for general purpose processing. (Acrylic is damaged by Alcohol and some cleaning agents.) Clear Non-dissipative PVC glove box is a good choice for operations with many corrosive chemicals and alcohol. Transparent Static-Dissipative PVC eliminates static charges keeping the dry box clean and it does not attract particles from the air. Polypropylene is the best chemical resistant.
Airlock Pass-through Transfer Chamber measures (ordered separately) minimize nitrogen loss and contamination inflow while parts are placed or removed. It includes optional Gas-in port and an Automatic pressure relief valve.
Two Internal access doors open inward to allow easy parts transfer from inside the Glovbox. All Doors using stainless steel  frames that increase the structural rigidity of the door. They feature one-piece Rubber Bulb, Vinyl gasket. 
Removable fully gasketed back wall for operations involving large equipment.
Polypropylene Model has a tempered glass front window and  It also features an external mount flourescent light.

Glovebox Standard Features

How to choose right material and Accessories?
Or Call 1-(888) 216-8033
Request Quote
Std. Features:
Main chamber Overall Dimension":
Two-port Glovebox: 35" W x 24"D x 25"H
Four-port Glovebox : 60" W x 24"D x 25"H
Four-port (B2B):      35" W x 36"D x 25"H

Wall thickness:  1/4"

Airlock Chamber:
Door Style: Swing Down
Overall Size: 11.5" W x 10.5"D x 10.5"H
Door Opening: 10"W x 9.5" H

Number of Side doors: Two, Open inward

Removable Panel:
Back panel on the standard two & four ports
Side panel on Back-to-Back Gloveboxes

Glove port: 8" Diameter Including S.S Clamp

Common Accessories:
Glove Material: BUTADYL Anti-Static
15Mil 32" Length, Chemical Resistant

Gas Ports: Push-to-Connect fitting 1/4" OD
Tubing and Pressure relief /Bleeding valve.
Available Accessories:
Or Call 1-(888) 216-8033
How to choose right material and Accessories?
*  Acrylic is damaged by Alcohol and some cleaning agents
Glove boxes Shown with Optional Airlock Transfer Chamber
Scroll down For All Available Options
Cleatech's 2100 Series Isolation Gloveboxes provide a clean , low-humidity, Oxygen free environment for laboratory, cleanroom, electronic assembly and other critical processing operations in such industries as semiconductor and pharmaceutical manufacturing. These Gloveboxes set up for Positive pressure operations and when utilized with automatic purge control units, they can maintain a preset relative humidity or oxygen level using an inert gas such as Nitrogen.

These economical Glovebox chambers are available in clear Acrylic, clear non-dissipative PVC, Static dissipative PVC, polypropylene  with two and four glove ports. They could be used with any control modules for humidity / dehumidification and static neutralization. They can work with Nitrogen, Argon and Clean Dry Air (CDA) Source.
Prices Include Sales Discount - Limited Time!

Isolation Glove Boxes 2100 Series

Option  Code
Gloves,  Chemical Resistance 15-mil
thick Standard 9 hand size
Gloves with Accordion Sleeve 28"
Flexible Length 9" hand size
Bel-Art Bare Hand Entry (Iris port), one
pair, Installed
Bare Hand Entry (Iris port) Cover, one
Request Quote
Airlock Type
Clear Acrylic *
  Static-Dissipative PVC
Non-Dissipative PVC
  White Polypropylene
with Clear PVC door
Transfer Chamber

Four-Port Glovebox
(Same-Side Ports)
Four-Port Glovebox
(Back-to-Back Ports)
Glovebox Type
Clear Acrylic *
  Static-Dissipative PVC

Non-Dissipative PVC
White Polypropylene
with Tempered Glass
Two-Port Glovebox
(One Operator)
Polypro Glove box with Extrenal mount light
Glove_Box_2100 Series
Acrylic Glovebox 2100 Series
Back-to-Back Glovebox

Glove Box Dimensions
Related External links:
Buy On-line Glovebox 2100
Buy Glovebox in ebay
Isolation Glove Box
Lab Glove Box System

Plastic Dry box/ Glove Box
Desiccator & Glove Box systems

Isolation Chamber/ Acrylic Glove Box

Glove Box With Power Hospital Grade Power Strip and humidity Sensor
Bare Hand Entry Port (Iris port) & Cover For Glovebox
Gloves with Accordion Sleeve
Anti-Static Chemical Resitant
Removable Anti-Static Chemical resitant Gloves
Bare Hand Entry Port (iris port) & Cover For Glovebox
Gloves with Accordion Sleeve Anti-Static Chemical Resitant
Spill Tray Stainless
Steel For Glovebox
Glove box standard access door with Stainless Steel frame
O2 Analyzer- Automatic Purge control unit with O2 Sensor for Glovebox
Spill Tray Stainless Steel For Glovebox
Automatic Purge Control Unit with Humidity Sensor
O2 Analyzer- Automatic Purge Control Unit with O2 Sensor for Glovebox
Automatic Purge Control Unit
Oxygen Monitor mounted on the foldable  bracket on the side wall of the glove box
Oxygen Monitor mounted on the foldable  bracket

2200 Portable Glove Box

2300 Containment Glove Box

HEPA Filtered Glove Box, protect the operator, in terms of hazardous or infectious agents.

It's a HEPA / ULPA filtered glove box with Blower Module, An Open loop Containment Glove box which often maintain a negative pressure in the workspace to prevent hazardous materials from escaping.

Containment Glove Boxes with Filter / Fan Module
Click here for Model 2200 Gloveboxes
Portable glove box
Economical portable glove box systems are lightweight and portable so it can be moved to where ever you need it to be. It measures 27"Wx18"Dx18"H

User accesses with gloves from
the front ports;
Lift-up front window for easy access. For applications involving large equipment, you can simply remove and then reinstall the
fully gasketed back wall.
Click here for Model 2300 Gloveboxes
Product Tags:
Cleatech manufactures Laboratory Glove box, Cleanroom Glove box, Cleanroom Glovebox, Lab Glove box, Lab Glovebox, Glove box for lab, Nitrogen Glovebox, Low humidity Glove Box, Low humidity Glovebox, Controlled atmosphere Glove Box, Controlled atmosphere Glovebox, Controlled humidity Glovebox, Controlled humidity Glove Box, Controlled moisture Glove Box, Controlled moisture Glovebox, Controlled RH Glovebox, Controlled RH Glove Box, Low RH Glove box, Low RH Glovebox, Acrylic Glove box, Acrylic Glovebox, Plastic Glove box, Plastic Glovebox, Containment Glovebox, Containment Glove box, Acrylic Nitrogen Glove box, Acrylic Nitrogen Glovebox, Nitrogen purge Glove box, Nitrogen purge Glovebox, N2 Glove box, N2 Glovebox made in California, USA

We offer Nitrogen Generators which eliminate the inconvenience and the high costs of nitrogen cylinders.
Generators (New)

Nitrogen Generators

Buy S-2100 Glovebox On-line
Two-port Gloveboxes
Four-port Gloveboxes
Other Gloveboxes:
Close Loop Glove Box, with filtration ideal for removing fine pharmaceutical powders, aerosols and most microbial contaminants. they provide continuous purifying of the process gas environment
Available in Static dissipative material.

2400 Closed Loop Glove Box

Click here for Model 2400 Gloveboxes
Four Port Glove Box (Twin)
Same-Side Ports
Four Port Glove Box Back-to-Back Ports
Click to Enlarge Pictures
Glovebox with Front Tilt-up door
Isolation Glove Boxes