Automatic Purge Control Units
(Inert Gas Purge Systems)

Enhance Your Laboratories Air Quality

Automatic purge control units work with inert gas such as Nitrogen, Argon or Clean Dry Air (CDA) Source. They are design to automatically control purge system to maintain desired low relative humidity or low Oxygen level in a desiccator, glove box or any other enclosure. Cleatech purge control units reduce inert gas (nitrogen) consumption and cost by 70%.

Product CodePurge Control UnitsPriceQty
A21-HM-HDSHumodule Type HS, Single Purge, Automatic Purge Control Unit with RH SensorRFQ0
A21-HM-HDDHumodule Type HD, Dual Purge, Automatic Purge Control Unit with RH SensorRFQ0
A21-HM-OAAutomatic Purge Control Unit – Oxygen Analyzer with O2 SensorRFQ0

Choose the Duct or the Fan module from the table below

Duct / FanDescriptionPriceQty
A11-DU-P66″ OD duct Port for Polypropylene Exhaust Hoods$650
A11-DU-P88″ OD duct Port for Polypropylene Exhaust Hoods$700
A11-DU-S66″ OD duct Port for Stainless Steel Exhaust Hoods Only$3500
A11-DU-S88″ OD duct Port for Stainless Steel Exhaust Hoods Only$3700
A11-FM-P120Fan module, Polypropylene Housing 120VAC, Adjustable Speed,
480 CFM _ (To be ordered w/ duct port) For polypropylene Hoods*
$6450
A11-FM-S120Fan module, Stainless Steel Housing 120VAC, Adjustable Speed,
480 CFM_ (To be ordered w/ duct port) For S.S fume Hoods*
$1,3500

* Up to two duct ports /fan modules can be ordered for the fume hoods depends on the width of the hood.

Note: Blower Module is not rated for Acid and Corrosive Chemical

Accessories

Select the Accessories you needed from the table below:

Option CodeDescriptionPriceQty
A11-LI-PFluorescent light, External Mount (recommended for more visibility)$1650
A10-MT-AVSwing Vane Manometer- Air Velocity Meter$750
A10-MT-AAAirflow Alarm Monitor ** with side wall sensor probe, (Also available in duct mounted sensor) More Info $3900
 A10-MT-AA3Airflow Alarm Monitor colored Touchscreen with sidewall sensor, (Also available in duct mounted sensor probe) More Info $6950
 A10-PO-HS4Hospital Grade Power Strip, four outlets $1650
 A11-WSWorksurface, price 25% of the hood price in each selected model +25%0
 A11-ST-P30HL  Stand 30″Height, epoxy Powder Coated Steel, Leveling Mount (caster available) $6350
 A11-ST-P35HL  Stand 35″Height, epoxy Powder Coated Steel, Leveling Mount (caster available) $6850

** Airflow Alarm Monitor is recommended to improve laboratory fume hood safety.
Note: Stands are topless. Worksurface is required if a stand is ordered. Stand with the custom height is available

single door desiccator

Purge control Module with RH sensor – Humodule ™ :

New designed Automatic Purge Control Unit Humodule ™ comes in two different configurations: Humodule H (Dehumidification) & C (Dehumidification & Humidification):

HUMODULE-H

Automatic Purge Control Unit with RH sensor- Humodule H a dehumidification system, capable of measuring and displaying humidity in the range: 0-100%RH, Accurately controls and maintains the RH% on a set point between 5%RH to ambient level (+/- 3% RH), required compressed dry air or inert gas.

Type S: It’s a single purge unit, it keeps the humidity of enclosure on the set point by purging Nitrogen when the moisture climbs above an adjustable set point. The Nitrogen flow is stopped by a solenoid valve when the humidity is lower than the setpoint. The input pressure is controlled by the pressure regulator (0 – 30 psi), and the output flow rate by the Flowmeter (0 – 20 SCFH).

Type D: It is a dual purge unit. While inside related humidity level is below set point, the system provides low purge (2-20 Cubic feet per hour) inert gas maintaining positive pressure inside the enclosure in order to have free contaminants and moisture environment. When the moisture climbs above an adjustable set point the system automatically activates high-flow purge (0.5 -30 PSI).

Available in clear and UV Amber acrylic

Provides dust and moisture-free storage

Transparent Static-Dissipative PVC eliminates static charges

25 lbs. Weight capacity

Purge Control Module with O2 Sensor

Cleatech Nitrogen Purge Control system with Oxygen sensor (Oxygen Analyzer) works with an inert gas such as Nitrogen and Argon. The system monitors the O2 level 0 to 100% (convertible to ppm scale) and it’s able to maintain the O2 level inside the enclosure on the desired set point level. It’s an inert gas dual purge system which provides low purge (2-20 Cubic feet per hour) when the O2 level is below the set point maintaining a positive pressure inside the enclosure (e.g glovebox) to have free contaminants and moisture environment. When the oxygen level climbs above an adjustable set point the system automatically activates high-flow purge (20-200 SCFH ).

  • Oxygen Analyzer / Automatic Purge Control Unit with O2 Sensor, 0 to 100% Oxygen level reading range, including external model CAG-250E sensor, locking sensor interface cable, 115/230 VAC, Stainless Steel enclosure, Bench-top, Alarm Output, RS 232 Service port, Available with 4-20mA negative ground, 0-10VDC range ID and choice of 0-1VDC, 0-5VDC or 0-10VDC analog oxygen signal.

Multi-Channel Purge Control Module with RH Sensor:

Other Configuration for desiccator cabinets:

  • In One-channel purge control unit (Humodule H & C), there is only one humidity sensor which is installed in the lower chamber of multi-chamber desiccators. There are some perforated holes between chambers which connect the chambers together.
  • For more critical requirements, select the Multi-Channel nitrogen purge control unit. (Available in two to four channel models). For each chamber there is separated sensor and controller. When any door opens the system responses faster to the sudden RH% increase.

Our Clients

Have a Question? Give Us a Call

1-888-216-8033