Benchtop Vertical Laminar Flow Hoods

Clean Bench ISO 5 (Class 100) Bench-top Vertical Laminar Flow Hoods with an air-recirculation plenum utilize HEPA filters that rate 99.99% efficient at  removing 0.3 micron particulate airborne contamination to meet cleanliness requirements. The back plenum recirculates filtered air to reduce the percentage of dirty air within the work area.

How to Request a Quote

Select the Quantity on the right column of the table below. Click on “Request a Quote” button at the bottom of the page.

Product CodeModelWork Space DimensionDimensions W” x D” x H”PriceQty
1000-2-A3 Feet – Benchtop34 x 27.5 x 2937.5 x 30 x 45$4,0100
1000-2-B4 Feet – Benchtop46 x 27.5 x 2949.5 x 30 x 45$4,1000
1000-2-C6 Feet*- Benchtop71.5 x 27.5 x 2975 x 30 x 45$5,9700
1000-2-D8 Feet*- Benchtop95 x 27.5 x 7099 x 30 x 45$6,1300

Prices above including Fan / Filter Module (120V Fan / HEPA filter 99.99% @ 0.3µm). ULPA filter 99.999% @0.12µm) and 220V units are available upon request.
* 6 & 8 feet models are including two Filter and Blower Modules

Accessories

Select accessories from the table below

Work Surface Options

Product CodeWorksurface ChoicePriceQty
A10-WS-PR33 Feet Hood$2300
A10-WS-PR44 Feet Hood$2500
A10-WS-PR66 Feet Hood$3500
A10-WS-PR88 Feet Hood$4000

Bench-top Hoods are not included worksurface. Please order from the above table if required.

Product CodeWorksurface ChoicePriceQty
A10-WS-SR33 Feet Hood$5400
A10-WS-SR44 Feet Hood$5700
A10-WS-SR66 Feet Hood$6800
A10-WS-SR88 Feet Hood$8200

Bench-top Hoods are not included worksurface. Please order from the above table if required.

Stand Options

Product CodeStand ChoicePriceQty
A10-ST-P30R33 Feet Hood$7600
A10-ST-P30R44 Feet Hood$7900
A10-ST-P30R66 Feet Hood$9100
A10-ST-P30R88 Feet Hood$1,0100

Work surface is required for using stand. Please choose a worksurface from the table above. Stand material Epoxy powder coated Steel Available in 30″ and 35″Height

Product CodeStand ChoicePriceQty
A10-ST-P35R33 Feet Hood$8200
A10-ST-P35R44 Feet Hood$8400
A10-ST-P35R66 Feet Hood$9300
A10-ST-P35R88 Feet Hood$1,0500

Work surface is required for using stand. Please choose a worksurface from the table above. Stand material Epoxy powder coated Steel Available in 30″ and 35″Height

Ultra-Violet, UV Light Options

Product CodeDescriptionPriceQty
A10-UV-30UV-C Sanitation light, 30″ Lamp, for 3 feet Model w/ Manual Switch$4700
A10-UV-42UV-C Sanitation light, 42″ Lamp, for 4 feet Model w/ Manual Switch$6000
A10-UV-60UV-C Sanitation light, 2x 30″ Lamp, for 6 feet Model w/ Manual Switch$8600
A10-UV-82UV-C Sanitation light, 2x 42″ Lamp, for 8 feet Model w/ Manual Switch$9300

UV Light Must be off while the system is operating. However Clear PVC Side windows and Front Sash shield operator against UV-C light.

Other Options

Product CodeDescriptionPriceQty
A10-FF-UUpgrade to ULPA Filter 99.999% efficient at 0.12µm particlesRFQ0
A10-SA-SD34Upgrade to Static Dissipative PVC side windows and front Sash$3500
A10-MT-AVSwing Vane Manometer- Air Velocity Meter$1000
A10-PO-HB2Hospital Grade Dual Power Outlet Bulit-in$1900

Standard Features

  • Portable laminar flow work-stations provides a space-saving design that can be positioned on nearly any bench or work surface.
  • Available with an optional 304 stainless steel or polypropylene worksurface and epoxy powder coated steel stand. Stands can be ordered with caster and are available in 30″ and 35″height.
  • Consists of an integrated Fan Filter module. Meets IEST recommended practices. low sound, low watts Measuring only 50 dBA. Running at only 240 watts @ 90 fpm 490 CFM @ 250 Watts
  • Choice of HEPA: 99.99% efficient @ 0.3µm particles or ULPA: 99.999% efficient @ 0.12µm particles
  • Minihelic gauge (0 – 3” Water Column) monitors pressure differential. When the limit is exceeded, the filter(s) should be replaced.
  • Each model includes a tilt-up sash that increases airspeed by restricting the air flow
  • Back Plenum on bench-top models provides air recirculation that reduces the percentage of dirty air passed through the filter. Overall, it extends the life of the filter.
  • Built-in Fluorescent Light
  • Optional Built-In Hospital Grade Dual Power Outlet

Specifications

  • General Construction: Polypropylene & Powder Coated Steel Structure
  • Side Panels: Transparent Non-Dissipative PVC or Static-Dissipative PVC windws
  • Prefilters: Washable Polyurethane Foam
  • Final Filters: HEPA: 99.99% efficient @ 0.3µm particles or ULPA: 99.999% efficient @ 0.12µm particles
  • Fan Motor: Direct drive, forward curve, centrifugal-type with sealed bearings; rated for continuous duty; furnished with overload protection and a two-speed switch. Rated .25 HP @ low speed; .333 HP @ high speed (2′ x 4′ models)
  • Average airflow velocity: 90 feet/minutes (fpm)
  • Air Flow: 4-Feet Models: High Speed 580 CFM or 490 CFM @ 90fpm; 3 & 6 Feet Models: High Speed 540 CFM or 440 CFM @ 90fpm
  • Sound level: 50 dBA, measured no more than 30” from filter face @ 90 FPM
  • Electrical: 110VAC, 50/60Hz (or 220VAC, 50 Hz). Meets the requirements of the National Electrical Code and applicable local codes. All components UL listed and CE marked
  • Performance: Particle count exceeds Class 100 requirements.

Our Clients

Have a Question? Give Us a Call

1-888-216-8033