Horizontal Laminar Flow Hood

Horizontal laminar flow hood is specially designed to provide the ideal particle-free, clean-air environment required for laboratory work testing, inspection, manufacturing or pharmaceutical procedures. These Horizontal laminar flow Hoods are ideal for applications which are not hazardous to the operator but require a clean work area.

Manufacturer: Cleatech | MPN: 1000-11-B| Ready to Ship within 25 days

Start Price: $4,050

Horizontal Laminar Flow Hood

Available Options

– Workspace Dimension: 34″ x 22″ x 26.75″ | Dimension: 52″ x 36″ x 62.75″ – without Stand
– Workspace Dimension: 34″ x 22″ x 26.75″ | Dimension: 40″ x 36″ x 62.25″ – with Stand

Stands are made of epoxy powder coated steel with 30″ height including casters. (custom height is available)

Options
Horizontal Laminar Flow Hood

Available Options

– Workspace Dimension: 46″ x 22″ x 26.75″ | Dimension: 52″ x 36″ x 32.25″ – without Stand
– Workspace Dimension: 46″ x 22″ x 26.75″ | Dimension: 52″ x 36″ x 62.25″ – with Stand

Stands are made of epoxy powder coated steel with 30″ height including casters. (custom height is available)

Options
Horizontal Laminar Flow Hood

Available Options

– Workspace Dimension: 70″ x 22″ x 26.75″ | Dimension: 76″ x 36″ x 32.25″ – without Stand
– Workspace Dimension: 70″ x 22″ x 26.75″ | Dimension: 76″ x 36″ x 62.25″ – with Stand

Stands are made of epoxy powder coated steel with 30″ height including casters. (custom height is available)

Options
Horizontal Laminar Flow Hood

Available Options

– Workspace Dimension: 100″ x 36″ x 32.25″ | Dimension: 94″ x 22″ x 26.75″ – without Stand
– Workspace Dimension: 100″ x 36″ x 62.25″ | Dimension: 94″ x 22″ x 26.75″ – with Stand

Stands are made of epoxy powder coated steel with 30″ height including casters. (custom height is available)

Options

Our laminar flow workstations provide a clean bench meet Class 100 Cleanroom Classification ISO 5, provide a clean environment ideal for the pharmaceutical, medical, food and industrial sectors for sterile manipulations, electronics, assembly of miniature mechanisms, any other application where clean conditions are required to protect the product from airborne contaminants.

Our laminar flow hoods are available in horizontal and vertical airflow configuration and in multiple models. Learn more about our vertical laminar flow hoods

  • Overall Dimension: 52″ W x 36″D x 62″H
  • Work Area Dimension”: 47″ W x 22″D x 26.75″H
  • Construction: Polypropylene
  • Stand with caster , epoxy powder coated steel
  • Air slots along the side edges to minimize backwash and turbulence in the work area
  • Pre-Filter: Washable polyurethane foam
  • Final Filter: HEPA: 99.99% efficient @ 0.3µm particles
  • Fan Motor: Direct drive, forward curve, centrifugal-type with sealed bearings; rated for continuous duty; furnished with overload protection and a two-speed switch.
  • Average airflow velocity: 90 feet/minutes (fpm)
  • Air Flow: 650 4-Feet Model
  • Sound Level: 50 dBA, measured no more than 30” from filter face @ 90 FPM
  • Electrical: 110VAC, 50/60Hz Meets the requirements of the National Electrical Code and applicable local codes. All components UL listed and CE marked
  • Performance: Particle count exceeds Class 100 requirements.
  • Feed Through Fittings (Gas-in) & Bleeding Valve (Gas-Out) is required if using inert gas to reduce RH% or Oxygen level
  • Flowmeter 2-20 SCFH To Control Gas flow Manually
  • Automatic Purge Control Unit with Humidity Sensor, Maintains the low humidity level 0-100% inside the glovebox based on the set point by controlling Nitrogen/ Argon Flow
  • Automatic Purge Control Unit with Oxygen Sensor (O2 Analyzer). It Maintains the low Oxygen level 0-100% inside the glovebox based on the set point by controlling Nitrogen/ Argon Flow
  • Oxygen Monitor (oxygen analyzer) with a single range of 0-100% (-/+1%)
  • Hospital Grade Power Strip with four outlets provides fused 120 VAC/ 16A required if power outlet is needed inside the glove box.
  • Stainless Steel Work surface or Spill tray is recommended for Static Dissipative PVC glove boxes in order to protect the Anti static coating from scratching. It’s also recommended for transparents glovebox if it’s ordered with stand
  • Epoxy Powder coated Steel Stand with Caster choice of 30″Height and 35″ Height. In transparent gloveboxes It’s recommended to be ordered with stainless steel worksurface or spill tray

Similar Laminar Flow Hood

Our Clients